When you start google cardboard for the first time, it will ask you for a QR Code. Please scan the QR Code at the end of this article to set the Viewer Profile for nHance VRF1. If you have previously setup a Viewer on Google cardboard you will have to follow these steps. Start your […]
When you start google cardboard for the first time, it will ask you for a QR Code. Please scan the QR Code at the end of this article to set the Viewer Profile for nHance VRF3. If you have previously setup a Viewer on Google cardboard you will have to follow these steps. Start your […]
The controller will automatically power off after 5 minutes if unpaired or will power off in 10 minutes if left unused in paired mode.
Your device should have Bluetooth 4.0 or you might experience difficulties in using the controller.
When the controller is not responding or it asks for passkey, ensure that the battery is fully charged and try again or reset the controller by inserting a pin in the reset button.
If you have previously paired the controller with another device and it is in range, you need to first disconnect the controller from that device and try again.
Newer updates of iOS at time do not allow external controller functions, so this controller might have problems running on the new updates of iOS till they release further updates allowing use of external controllers.
The answer to this is yes and no. Since there are many customized firmwares by manufactures, certain keys or modes might not work as desired for a few smartphones . In this case, you need to find the right combination which works for them.
If you are not able to change the mode, then unpair the controller from your device, reset the controller , then power off the controller and again pair it in the right mode (Android/iOS).
Head tracking means that when you wear a VR headset, the picture in front of you shifts as you look up, down and side to side or angle your head.
